Thanks to wireless fidelity or Wi-Fi for short, we don't need a wired connection to browse the internet. Most households now have a Wi-Fi connection, but some are stronger than others. IF you have a weak signal, there are a couple of things that might fix that.
1. Location
There's only a certain radius where your router can provide a signal. With that said, you need to place it in the middle of your home, or at least somewhere where it is close to everyone who uses the Wi-Fi. It's also best to place it in an elevated location. In case you don't know, furniture and other obstacles can interfere with your signal.
2. Keep It Away from Electronics
Just like furniture and other objects, electronics can also cause your Wi-Fi signal to grow weak. If by any chance you have your router near a microwave, you should move it right away as the kitchen appliance emits a 2.4GHz band signal as well. When you use it, you'll notice that the Wi-Fi icon will lose a few bars.
3. Determine the Limit of Your Wi-Fi
Some wireless connections for the internet can be strong enough to handle even more than a hundred devices, but most home Wi-Fi isn't that strong. Your internet service provider (ISP) will have the information you need about the number of devices that can connect to it. Most home Wi-Fi cannot exceed ten devices before it slows down.
4. Limit Your Bandwidth Usage
If you have several devices connected all at once, you should know when to turn some of them off. Depending on the plan you availed, your Wi-Fi might not be able to carry five devices all at once that are watching 4K videos. This is especially true if your bandwidth does not exceed 100 Mbps.
5. Upgrade Your Internet Plan
If there is nothing you can do about the simultaneously busy devices running bandwidth-hungry apps, then you should upgrade your internet plan. If this is a regular thing, then it might be worth a few extra dollars every month. Otherwise, everyone using the Wi-Fi will suffer laggy browsing.
6. Use a Repeater
Believe it or not, you can extend the signal of your Wi-Fi by placing a repeater in your home. It can be useful when you only have one router but a big house. You can plug in the repeater in the areas in your house with weak coverage. Just note that this does not add to the bandwidth of your Wi-Fi, only the signal strength.
7. Create a DIY Booster
You can boost the signal of your Wi-Fi without having to be tech-savvy. All you need is aluminum foil and the skill to create an antenna out of it. Fold the foil and make it look like the satellite dishes you would find outside. Place it behind the router, and it will serve as a way to direct the signal in a certain direction.
